Products By Category

MSDS Sheets

Quality Control Equipment

Auto-draw III Automatic Drawdown Machine

Auto-Draw III is a motorized drawdown machine that is an accurate, consistent approach to dyne testing. The Auto-Draw III is affordable for even the smallest testing laboratories. By providing a consistent rod pressure and the ability to control draw speed, the Auto-Draw III, provides improved dyne testing accuracy and repeatability. This compact unit requires only 11”x22” of bench space, and can make samples up to 8.5” x 11”. Using 120 VAC, with a maximum 2 amp draw, this system can be plugged into any wall outlet. A 220 VAC is also available upon request.

Coefficient of Friction (COF) Testers

Jemmco offers a complete line of accessories for your FX Series friction testers including cutting templates to reduce sample preparation time, calibration tools to allow in-house system calibration, and our industry-leading FX-7200 Quality Control Software for Force vs. Time graphing and statistics. Serial cables are available to allow operation of your 7100 Series friction testers to operate in Digital mode or Digital/Software mode.

Dart Impact Testers

We offer a complete line of manual and pneumatic dart impact testers for film and sheet products, including Method A and Method A/B. We also offer replacement dart heads, stems, and weights for our, as well as other, models.

Fast-Draw Portable Drawdown Tool

This hand-held portable drawdown tool can be used on the plant floor or in the laboratory. It is also portable enough to be used in the field at customer sites. Capable of producing samples up to 5” wide, the Fast-Draw can lay down a coating as thin as .0025” or up to .009” thick, depending on the single wound wire rod selected. Thinner coatings can be applied with double wound rods.

Force Test Stands

Jemmco expands its line of Universal Testing Machines to include a comprehensive range of Motorized Force Test Stands, Force Gauges, and Grips & Accessories, introduced in March, 2007.

Laboratory Sample Cutters

To get the best performance from test instruments, you need to prepare your test samples with care and precision. Jemmco laboratory sample cutters are available for tensile, gauge thickness, COF, film shrinkage, elmendorf tear, and other, sample preparation.

Melt Flow Indexers

The Series LMI 4000 Melt Flow Indexers, available in 4 models, are designed to meet or exceed the ASTM D1238 specifications as well as international standards. This instrument provides an accurate, cost-effective means of monitoring material flow characteristics for lot-to-lot consistency of plastic resins, recycled materials, and is available with IV (intrinsic viscosity) correlation analysis packages.

Off Line Thickness Guages

Jemmco offers the most comprehensive range of off-line, bench top, thickness gauges available. Our line includes profiling and non-profiling models, computerized and stand-alone models, and bench and hand-held micrometers.

Easy to use and affordable, the Model RT-6000 Opacity Meter provides quick economic payback by reducing colorant and pigment usage. A relative opacity meter, colorant loading is measured by comparing samples against your internal standards which allows you to provide consistent product quality to your customers.

Tensile Testers, Universal Testers and Accessories

Ideally suited for film and sheet materials, Jemmco's wide range of tensile tester and universal tester models will meet your most stringent quality control testing requirements. A complete range of accessories such as pneumatic grippers, mechanical grippers, and sample preparation tools are all available from Jemmco.

© Jemmco, LLC 2011. All Rights Reserved.