Product Details
JemmSil™ RS200 High Release Sleeves are made with a proprietary rubber, which features excellent release properties and very good temperature resistance. This sleeve is ideal for applications requiring high temperature, non-stick properties and is often used in place of the more expensive bonded rubber coverings and release hard coatings.
Features
- Excellent release properties
- Good temperature resistance
- Ideal for non-stick applications
- Economical
- Fits over existing idler rolls
- In-plant installation
- Continuous operating temperature of 350º F and an intermittent service temperature of 400º F
- Can be cleaned with acetone using light pressure
- Ideal for processing pressure sensitive materials such as labels and label stock
- Not recommended in nip applications
- Supplied with a .090” wall thickness
- Available in many sizes to fit a wide range of roller diameters
- Some sizes may not be in stock; please contact us for lead times.
Technical Specifications
| Release Properties |
Excellent |
| Traction Properties |
Very Good |
| Heat Resistance |
400°F |
| Wear Resistance |
Good |
| Hardness |
35 Shore A |
| Wall Thickness |
2.3-2.6 mm |
| Available Diameters |
1", 1.5", 2", 2.5", 3", 3.5", 4", 4.5", 5", 5.5", 6", 7", 7.5", 8", 10" |
| Available Lengths |
Up to 10 meters |
| FDA Compliant |
No |
Sleeve Sizing Chart
| Diameter |
Relaxed ID |
Wall Thickness |
Roller Diameter Range |
| 1" |
25.4mm |
2.3mm-2.6mm |
25.4mm-32mm |
| 1.5" |
29mm |
2.3mm-2.6mm |
35mm-46mm |
| 2" |
38mm |
2.3mm-2.6mm |
48mm-61mm |
| 2.25" |
43mm |
2.3mm-2.6mm |
55mm-66mm |
| 2.5" |
48mm |
2.3mm-2.6mm |
60mm-73mm |
| 3" |
57mm |
2.3mm-2.6mm |
73mm-87mm |
| 3.5" |
67mm |
2.3mm-2.6mm |
86mm-99mm |
| 4" |
74mm |
2.3mm-2.6mm |
99mm-112mm |
| 4.5" |
86mm |
2.3mm-2.6mm |
112mm-124mm |
| 5" |
98mm |
2.3mm-2.6mm |
124mm-137mm |
| 5.5" |
111mm |
2.3mm-2.6mm |
137mm-148mm |
| 6" |
124mm |
2.3mm-2.6mm |
148mm-172mm |
| 7" |
132mm |
2.3mm-2.6mm |
172mm-192mm |
| 7.5" |
136mm |
2.3mm-2.6mm |
192mm-203mm |
| 8" |
140mm |
2.3mm-2.6mm |
200mm-225mm |
| 10" |
187mm |
2.3mm-2.6mm |
245mm-275mm |
*To calculate sleeve length, simply add 10% to the face length of your roller.
Installation
Jemmco's rubber sleeves are designed for easy, in-plant installation to reduce time and money spent sending out spare rollers for recovering.
Three Simple Steps for In-Plant Sleeve Installation!
- 1.
Slide Sleeve over the edge of the roller.
- 2.
Insert air nozzle under sleeve, inflate sleeve and pull down to cover roller.
- 3.
Trim the sleeve to the edge and violà!
Video Tutorial
