JemmTrac™ T Traction Roller Tape is a non-scratching, non-marring, economical solution to web handling with light tensions. This proprietary material provides a unique tacky surface that will keep rolls turning and prevent them from marking or scratching substrates. JemmTrac™ T Traction Roller Tape is easy to apply, and can be used on existing idler rolls, making it suitable for most applications. JemmTrac™ T offers excellent resistant to Esters, Alcohols, and water and has good release properties. JemmTrac™ T is a soft durometer material that can be cleaned with water, IPA and Water, JemmClean TR Treater Roll Cleaning Solution, or JemmClean CAP All Purpose Citrus Cleaner.
- Typically stocked in rolls that are 50 mm wide and 35 meters long
- Wall thickness of 2 mm
- Can be supplied in custom 4 mm or 6 mm thick for applications requiring more cushion
||30-40 Shore A
Four Simple Steps for In-Plant Tape Installation!
To get started, wrap your Jemmco tape one full rotation around the roller at the angle required to achieve your spiral. Make a mark on the second wrap where it meets the beginning of the tape.
Lay the tape on a flat cutting surface and cut the tape at an angle from the marked point to the opposite corner of the beginning of the tape roll.
If applicable, remove the liner at the start point and begin wrapping the tape at the edge of the roller.
Wrap the tape around the roller - at even angles - without leaving any gaps or air underneath the tape.