Product Details
As the largest supplier of Silicone Treater Sleeves in North America and the choice of most domestic and international OEM’s, Jemmco is 
proud to offer the SRS Series Dielectric Silicone Corona Treater Sleeve and the CRS100 Conductive Silicone Corona Treater Sleeve to meet a wide range of applications. With their easy in-plant installation, both sleeve types create significant savings by eliminating the need for costly spare rollers, heavy metal roller cores, and costly two-way shipping.
Ideal for covered roll treater applications
Features
- Manufactured to very tight tolerances
- FDA compliant
- Fits foreign and domestic treaters
- Made to fit a wide range of roll diameters
- Available in sizes 1.5" to 10" diameters
- Custom sizes available upon request
- Available in custom lengths up to 10 meters long
Technical Specifications
| Release Properties |
Good |
| Traction Properties |
Good |
| Heat Resistance |
400°F |
| Wear Resistance |
Excellent |
| Hardness |
60-70 Shore A |
| Dielectric Strength |
350-400 in2/kw |
| Wall Thickness |
2, 2.5 and/or 3 mm (depending on width) |
| Available Diameters |
1.5", 2", 2.25", 2.5", 3", 3.5", 3.75", 4", 4.5", 4.75", 5", 6", 8", 10" |
| Available Lengths |
Up to 10 meters |
| FDA Compliant |
Yes |
Sleeve Sizing Chart
| Diameter |
Relaxed ID |
Wall Thickness |
Roller Diameter Range |
| 1.5" |
36mm |
2mm or 3mm |
40mm to 44mm |
| 2" |
45mm |
2mm or 3mm |
50mm to 60mm |
| 2.25" |
52mm |
2mm or 3mm |
57mm to 62mm |
| 2.5" |
58mm |
2mm |
63mm to 68mm |
| 3" |
68mm |
2mm or 3mm |
73mm to 78mm |
| 3.5" |
80mm |
2mm |
85mm to 90mm |
| 3.75" |
88mm |
3mm |
93mm to 98mm |
| 4" (thick) |
93mm |
3mm |
98mm to 103mm |
| 4" (thin) |
95mm |
2mm |
100mm to 105mm |
| 4.5" |
105mm |
2mm or 3mm |
110mm to 115mm |
| 4.75" |
110mm |
3mm |
115mm to 120mm |
| 5" |
115mm |
2.5mm |
120mm to 125mm |
| 6" |
139mm |
2.5mm |
144mm to 149mm |
| 8" |
190mm |
2mm or 2.6mm |
195mm to 200mm |
| 10" |
244mm |
2.5mm |
249mm to 255mm |
*To calculate sleeve length, simply add 10% to the face length of your roller.
Installation
Jemmco's rubber sleeves are designed for easy, in-plant installation to reduce time and money spent sending out spare rollers for recovering.
Three Simple Steps for In-Plant Sleeve Installation!
- 1.
Slide Sleeve over the edge of the roller.
- 2.
Insert air nozzle under sleeve, inflate sleeve and pull down to cover roller.
- 3.
Trim the sleeve to the edge and violà!
Video Tutorial
